240-8111 Pyrradiometer

The 240-8111 Pyrradiometer is a total hemispherical radiometer, used for exact determination of net radiation in short-wave and long-wave radiation range with two separately working receivers and with a built-in thermometer to determine reference temperature.

The 240-8111 Pyrradiometer is a total hemispherical radiometer, used for exact determination of net radiation in short-wave and long-wave radiation range (0.3 to >30 µm) with two separately working receivers and with a built-in Pt-100 resistance thermometer to determine reference temperature. Two black, radiation absorbing plates act as sensors, one facing upward and one facing downward. Each transfers the energy absorbed to a separate 90-junction copper-constantan thermopile. Both of the two outputs are approximately 15 µV/W/m², one representing downward total radiation and the other representing upward total radiation. The difference between these two provides net radiation.

Lupolene domes shield the thermopiles from wind and moisture. Lupolene is essentially transparent to radiation from 0.3 to 60 microns. Two desiccant tubes are supplied to remove water vapor from inside the instrument housing. For long-term applications, fittings permit attachment of a nitrogen source for continuous purging. Levels are embedded in both the top and bottom faces of the pyrradiometer, and a 10-inch mounting arm is included.

Specifications

  • Internal temperature sensor: 100 ohm platinum resistance sensor
  • Spectral sensitivity: 0.3 to >30 µm
  • Azimuth response: < 5% of the value
  • Cosine response: < 5% of the value, zenith angle 0° to 80°
  • Response time: < 25 sec (95%), < 45 sec (99%)
  • Measuring range: 0-1500 W/m²
  • Resolution: < 1 W/m²
  • Stability: < 3% per year (temporary operation)
  • Temperature effect: < 2% of the value between -20 °C to + 40 °C
  • Linearity: < 2% in the range 0.5-1330 W/m²
  • Impedance: About 190 ohm/receiver plate
  • Output: About 15 µV/W/m²
  • Ambient temperature: -40 °C to +60 °C
  • Windshield: Lupolene dome, 2.47″ (62 mm) diameter
  • Leveling: Bull’s-eye levels on each face
  • Size: 14″ L x 4″ W x 3.5″ H (355 x 100 x 90 mm)
  • Weight/shipping: 4 lbs/7 lbs (1.8 kg/3.2 kg)
  • Cable: 4-conductor shielded, 5 m length

Downloads