• The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • 1-530-823-7185
    • PayPal
  • The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • NovaLynx Corporation
    1-530-823-7185
    Products > Wind Speed and Direction

    200-1390-90 WindObserver 90

    200-1390-90 WindObserver 90
    200-1390-90 WindObserver 90
    The WindObserver 90 is capable of monitoring extreme high wind speeds up to 90m/s (201mph). WindObserver 90 has an optional heating system and is available with a range of different mounting and connection options for simple installation.
    Product Details

    The WindObserver 90 has been developed for measuring the highest wind speeds in extreme weather environments such as typhoons and hurricanes and is available with optional heating. The sensor provides data via RS422/RS485 bidirectional link, which allows several units to be networked together and data logged on demand.

    With innovative transducer design, this anemometer boasts a very high wind speed range of 0 – 90 m/s (0-201mph) and gives an output status indicating the validity of data, so that you can be confident that the instrument is providing accurate information. With an IP66 rated stainless steel construction, this anemometer meets the stringent performance criteria specified by wind turbine manufacturers, airports, marine, oil and gas production, and meteorological organisations around the world.

    Specifications

    Wind Speed Specifications

    • Range: 0-90 m/s (0-201mph)
    • Starting Threshold: 0.01 m/s
    • Accuracy: ±2% @ 12 m/s
    • Resolution: 0.01 m/s
    • Offset: ±0.01 m/s

    Wind Direction Specifications

    • Range: 0-359º (no dead band)
    • Accuracy: ±2º @ 12 m/s
    • Resolution: 1º

    Measurement

    • Ultrasonic Output Rate: 1-4 Hz
    • Parameters: UV, Polar, NMEA
    • Units: m/s, knots, mph, kph, ft/min
    • Averaging: Flexible, 1-3600 seconds
    • Power Requirement:
      • Anemometer Only: 20 - 30 VDC (60mA max, 50mA average)
      • Heating: Max 7A @24 VAC or DC

    Digital Output

    • Communication: RS422 / RS485 full duplex / half duplex
    • Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400
    • Formats: 8 bit data; odd, even or no parity
    • Anemometer Status: Supplied as part of standard message

    Mechanical

    • External Construction: Stainless Steel 316
    • Size: 389 mm H x 213 mm Dia (15.3" x 8.4")
    • Weight: 1.7kg (with 2m cable), 1.3kg (with connector)

    Environmental

    • Protection Class: IP66 (NEMA4X)
    • Humidity: 0% to 100% RH
    • Operating Temperature: -55ºC to +70ºC (heated option)
    • Precipitation: 300 mm/hr
    • EMC: EN 61326-1:2006, EN 55011:2007
    • Icing: MILSTD810F Method 521.2 Procedure I

    Approvals

    • Standards: Traceable to NAMAS standards
    • Site Calibration: None required. Integrity check unit (Zero wind) supplied as optional extra

    *Maximum speed depends on conditions

    Downloads

    Shipping data not found, please call for more information.