• The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • 1-530-823-7185
    • PayPal
  • The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • NovaLynx Corporation
    1-530-823-7185
    Products > Wind Speed and Direction

    200-1390 WindObserver II Ultrasonic Anemometer

    200-1390 WindObserver II Ultrasonic Anemometer
    200-1390 WindObserver II Ultrasonic Anemometer
    The 200-1390 WindObserver II wind speed sensor is an ultrasonic 2-axis anemometer for the measurement of wind speed and direction. With no moving parts this wind speed sensor is ideal for use in extreme environments.
    Product Details

    The 200-1390 WindObserver II wind speed sensor is an ultrasonic 2-axis anemometer for the measurement of wind speed and direction. With no moving parts this wind speed sensor is ideal for use in extreme environments.

    The WindObserver II utilises the same high-performance measurement technology as the Gill WindSonic wind speed sensor, with some additional features to extend the application potential of the sensor. The WindObserver II wind speed sensor has a high 0-65m/s wind speed measurement range, optional high temperature de-icing system (which extends the operational temperature range to 55ºC), sonic temperature output and averaging.

    This wind speed sensor features an IP66 rated stainless-steel housing, which is particularly suitable for use in salt-water environments. The WindObserver II wind speed sensor is proven in airport, offshore, marine and naval applications and carries Lloyd's register type approval.

    Specifications

    Wind Speed

    • Range: 0-65m/s (0-145mph)
    • Starting Threshold: 0.01m/s
    • Accuracy: ± 2% @12m/s
    • Resolution: 0.01m/s
    • Offset: ± 0.01m/s

    Wind Direction

    • Range: 0-359º
    • Dead band direction: None
    • Accuracy: ± 2º @12m/s
    • Resolution: 1º

    Measurement

    • Ultrasonic output rate: 1Hz, 2Hz, 4Hz, 5Hz, 8Hz or 10Hz
    • Parameters: UV, Polar, NMEA, Tunnel
    • Units: m/s, knots, mph, kph, ft/min
    • Average (Selectable): Rolling average - 1, 2, 10 min, Gust - 3s
    • Block average: 0-3600s

    Digital Output

    • Communication: RS422 / RS485 full duplex / half duplex
    • Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400
    • Formats: 8 bit data; odd, even or no parity
    • Anemometer Status: Supplied as part of standard message

    Power Requirement

    • Anemometer only: 9-30Vdc (40mA @12Vdc)
    • Heating (optional): 3A @24V ac or dc

    Sonic Temperature

    • Range: -40ºC to +70ºC

    Analog Output - Optional

    • Quantity: 3 (speed, direction, status or sonic temp)
    • Scale: Multiples of ± 10 m/s up to ± 70 m/s
    • Type: ± 2.5V, 0-5V or 4-20mA
    • V output resistance: 60 Ohms
    • 4-20mA loading: 10-300 Ohms

    Mechanical

    • External Construction: Stainless Steel 316
    • Size: 381mm x 213mm
    • Weight: 1.4kg

      Environmental

    • Protection Class: IP66 (NEMA4X)
    • Humidity: < 5% to 100% RH
    • Operating Temperature: -55ºC to +70ºC (Heated option)
    • Precipitation: 300mm/hr
    • EMC: EN 61000-6-2: 2001, EN 61000-6-3: 2001
    • Icing: MILSTD810F Method 521.2 Procedure I

    Approvals

    • Standards: Traceable to NAMAS standards, Lloyds Register type approval
    • Site Calibration: None required. Integrity check unit (Zero wind) supplied as optional extra

    Downloads

    Shipping data not found, please call for more information.