1-530-823-7185
  • PayPal
1-530-823-7185

200-1390-70 WindObserver 70

200-1390-70 WindObserver 70
200-1390-70 WindObserver 70
The 200-1390-70 WindObserver 70 is a solid state, heated ultrasonic anemometer designed for use within the aviation industry.
Product Details

The 200-1390-70 WindObserver 70 is a solid state, heated ultrasonic anemometer designed for use within the aviation industry. The sensor has been accepted for service by both the FAA Federal Aviation Administration (USA) and the CAA Civil Aviation Authority (UK) for the observation and reporting of surface wind. This WindObserver meets the requirements of Annex 3 to the Convention on International Civil Aviation Organization (ICAO) when supplied as part of a suitable AWOS*.

With 150 Watts of electrical heating in the anemometer head producing 1 Watt/cm² and tested in accordance with MILSTD810F, the unit is particularly suited to operate as part of Aviation Automatic Weather Observing Systems, which are often exposed to extreme weather conditions. Manufactured from stainless steel with no moving parts the sensor requires no on-site calibration and minimal maintenance.

*Accepted by the FAA & CAA for the observation and reporting of surface wind as part of a suitable AWOS (Automatic Weather Observing System)

Specifications

Wind Speed

  • Range: 0-70m/s (0-156mph)
  • Starting Threshold: 0.01m/s
  • Accuracy: ±2% @12m/s
  • Resolution: 0.01m/s
  • Offset: ±0.01m/s

Wind Direction

  • Range: 0-359º
  • Dead Band Direction: None
  • Accuracy: ±2º @ 12m/s
  • Resolution: 1º

Measurement

  • Ultrasonic Output Rate: 1-4Hz
  • Parameters: UV, Polar, NMEA
  • Units: m/s, knots, mph, kph, ft/min
  • Averaging (selectable): Rolling average - 1, 2, 10 min, Gust - 3s
  • Block Average: 0-3600s

Digital Output

  • Communication: RS422 / RS485 full duplex / half duplex
  • Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400
  • Formats: 8 bit data; odd, even or no parity
  • Anemometer Status: Supplied as part of standard message

Power Requirement

  • Anemometer only: 9-30 VDC (40mA @12VDC)
  • Heating (optional): 3A @24 VAC or DC

Sonic Temperature

  • Range: -40ºC to +70ºC

Mechanical

  • External Construction: Stainless Steel 316
  • Size: 381mm x 213mm
  • Weight: 1.7kg (with 2m cable) / 1.3kg (with connector)

Environmental

  • Protection Class: IP66 (NEMA4X)
  • Humidity: 0ºC to 100% RH
  • Operating Temperature: -55ºC to +70ºC (heated option)
  • Precipitation: 300mm/hr
  • EMC: EN 61000-6-2: 2001, EN 61000-6-3: 2001
  • Icing: MILSTD810F Method 521.2 Procedure I

Approvals

  • Standards: Traceable to NAMAS standards
  • Site Calibration: None required. Integrity check unit (Zero wind) supplied as optional extra.

Downloads

Shipping data not found, please call for more information.